你当前的浏览器版本过低或不支持。请升级或更换浏览器。推荐浏览器 Chrome Edge。

What is the wafer connector? Wafer connector application, advantages and so on

Many people may not know what wafer connector is to do. Below, small make up simply for everyone to introduce the application field and some characteristics of the company's products wafer connector:

[wafer connector application]

The wafer connector is a part that electrical engineers often touch. Its function is very simple, between the circuit is the communication bridge that blocks or isolates circuit, make current flow, make circuit can achieve predetermined function. Connector is an important part of electronic equipment. If you follow the current path, you will always find one or more connectors. A clamping connector belongs to a clamping connector, a plug and a socket. An electrical connector is a device that connects two active devices to transmit current or signals. Widely used in aerospace, national defense and other military systems.

[wafer connector advantages]

1. Improve the production process: simplify the assembly process of electronic products. It also simplifies the mass production process;

2. Easy maintenance: if an electronic component fails, it can be replaced quickly when a connector is installed;

3. Easy to upgrade: with the progress of technology, components can be updated when connectors are installed, and the old components can be replaced with new and more complete components;

Increase design flexibility: greater flexibility in use.

Why should wafer connector be used?

What should be supposed to happen if there is no wafer connector? The circuit must be permanently connected to a continuous conductor. For example, to connect an electronic device to a power supply, both ends of the cable must be securely connected to the electronic device and the power supply by means such as welding.

So, no matter be production or use, brought a lot of inconvenience. Replacing the car battery, assuming that the battery cable is fixed and welded to the battery, increases the vehicle manufacturer's workload, production time and battery installation costs. When the battery is damaged and needs to be replaced, the vehicle should be sent to the maintenance station. The old should be removed and welded to the new. Therefore, more labor costs should be paid. Using connectors saves you a lot of trouble. Buy a new battery from the store. Disconnect the connector. This simple example illustrates the benefits of connectors. It makes the design and production process more convenient and flexible, and reduces the production and maintenance costs.

The above mentioned is the introduction of some wafer connector products organized by the small make up of this site for everyone. If there is still doubt, you can consult the customer service of this site for details!