What we learned is that while there may be similarities in appearance between the RJ45 connector and the RJ11 connector (hereinafter referred to as RJ45, RJ11), there are still many differences in performance and some parameters between them. TXGA connector manufacturers summarize their three differences, for your reference:
1. Connector applications
The big difference between the two connectors, RJ11 and RJ45, is where they are actually used. For example: the RJ45 connector is for networking, where you can connect computers or other network components to each other, and the RJ11 is a cable connector for telephones, ADSL, modem cables, and so on.
Structure of connector
RJ11, RJ45 in addition to the application, there are differences in their structure, which can be easily viewed and recognized intuitively. If you look closely at the two connectors, you will see that there are only four wires inside the RJ11 connector and eight wires inside the RJ45 connector. But because of its nature, the RJ45 contains a slightly larger wire than the RJ11.
Three, connector wiring scheme
RJ45 and RJ11 are also very different in the wiring scheme. A typical RJ11 connector has six terminals and typically USES only four middle pins. POTS (plain old telephone line), for example, usually contains two pairs of wires, designed for two separate telephone lines.
Here are three differences between the RJ45 connector and the RJ11 connector. Choose TXGA manufacturer, 14 years focus on all kinds of connectors, advanced technology, strong strength, set connector research and development, production, sales, service in one. Quality is guaranteed, save time and worry. Please continue to pay attention to TXGA official website: http://www.txga.com/, convenient follow-up to understand the connector update dynamic.