Where you are： TXGA → News Center → News Detail
作者：TXGA 发布时间 2019.07.05 14:42:36 浏览量：346次
A gran head [utility model] | TXGA patent
TXGA connector company has received a patent for a gran head.
Inventor: tian ziliang
The patent number is ZL 2017 2 0008706.1
Patent application date: January 04, 2017
Patentee: shenzhen tesja industrial electronics co., LTD
Authorization announcement date: September 22, 2017
Abstract: The utility model discloses a grand head, its technical scheme including the subjects of joint and the joint are the main points of threaded connection nut, joint main body with the clamping ring and clamping claw, clamping claw end wall runs around the circumference of the distribution of interval groove, nut, across the top surface formed between adjacent pass trough grip, runs for grip adapter for clamping ring on the chute, the chute through clamping ring hanging wall, slot incline in the radial direction is set in one side, pass trough leans towards and nut tighten towards consistent, through the chute and grip to cooperate, can increase the stability of the clamping ring is installed, so when tightening the nut, When the cambered surface of the nut is connected with the clamping jaw, the clamping ring will be deformed inward, and there will be no relative sliding between the clamping ring and the clamping jaw, making the clamping ring less prone to wear and can be used for a longer time, and the chute runs through the top wall of the clamping weight, which is also convenient for the installation and disassembly of the clamping jaw, and the axial movement will not be restricted.
Principal right requirements: a grand head, including the joint and the joint subject threaded nut, joint main body described with clamping ring and clamping claw, described in the clamping claw end wall runs around the circumference of the distribution of interval groove, described in the nut, across the top surface is characterized by: grip formed between adjacent described through groove, described runs for grip adapter for clamping ring on the chute, the chute through clamping ring hanging wall, described slot incline in the radial direction is set in one side, described pass trough leans towards and nut tighten towards consistent.