你当前的浏览器版本过低或不支持。请升级或更换浏览器。推荐浏览器 Chrome Edge。

How to choose so many high-speed board-to-board connectors in the whole network? Tell you right away

The basic concept of board-to-board connectors is to connect different circuit boards together. With the increasing demand for high-speed board-to-board connectors, the current ordinary board-to-board connectors are in urgent need of upgrading. TXGA provides high-speed board-to-board connectors with a transmission rate upper limit of 28G/S, which escorts high-speed transmission. Click [Product Center] to immediately purchase the high-speed board-to-board connector.

When we buy board-to-board connectors, we can start from the following aspects:

1. High retention surface mount design

For SMT products, the retention on the board is generally considered to be poor. In fact, as long as the design is improved, the retention of the PCB can be effectively improved. For example, stacking the soldering bracket, the hole (micro hole) on the surface of the lead, and the large solder pad can increase the retention.

2. Rugged design

To ensure the firmness of the connector, and allow the use of flat block crimping tools, the pole plate is fixed on the housing to improve the robustness, achieve a more superior manufacturing process, and increase production.

3. High current and small pitch

With the miniaturization of automotive electronics and consumer electronics, the design concept of high current and small pitch must be fully taken into account.

4. Advanced lock design

The double lock design makes the high-speed board-to-board connectors more suitable for cars and subways. The friction lock is designed for general vibration applications. Double locks and double safety insurance ensure a reliable connection, and no special tools are required to dismantle (repair/replace) cables on site. It is suitable for applications such as monitors and LED car lights. Board-to-board connectors play a pivotal role in the design of the entire electronic system. Engineers need to pay attention not only to chip technology but also to the selection of peripheral devices when selecting electronic components, so that the system can run smoothly. , To achieve a multiplier effect.

The correct selection of high-speed board-to-board connectors can reduce the loss of product recalls, quality disputes, circuit board damage, and rework and repair of goods. Therefore, manufacturers should choose professional connector manufacturers. TXGA provides a variety of high-speed board-to-board connectors to choose from, and also provides product customization services, welcome your arrival.