The SMA adapter is a subminiature coaxial cable connector whose name comes from the Sub-MiniatureA connector. Usually used to transmit radio frequency signals. It has a wide transmission frequency range, up to 50G or higher, and can provide RF connections between circuit boards. Many microwave components, including filters, attenuators, mixers and oscillators, all use SMA adapters. TXGA produces high-quality and durable SMA adapters, with low line loss, high shielding, and mass inventory. They are shipped on the same day. Enter [SMA adapters] and place an order immediately.
SMA adapters are divided into test-grade adapters and production-grade adapters. Among all connector levels, the test-level connector has the best performance and is generally used as a calibration part. In order to provide a high level of performance and reliability, the adapter will use a special medium and a slotless female connection. So that it can maintain good accuracy after multiple uses.
This kind of test-level transfer to production, education and research is used in the input and output of the instrument or on the test equipment. It has better performance, smaller tolerance and longer service life.
There is also a production-grade SMA adapter, used in products, with relatively low performance, relatively large tolerances, limited number of connections, and relatively low prices. Every time you use this level of connector, you need to carefully check the connector. Generally, you will use the product. You don’t need to connect again after installation. The size of the outer conductor of the adapter is different to prevent incompatibility and error of the adapter. The connection method, bad storage method can easily cause damage to the SMA adapter.
The SMA adapter is light, stable and durable, and meets international environmental standards. SMA adapter is needed, contact TXGA.
