The Micro-USB connector is smaller than standard USB and Mini-USB connectors, saving space. It has a mating life and strength of up to 10,000 times, and a blind mating structure design. Supports the OTG function of USB, that is, in the absence of a host (such as a personal computer), portable devices can directly transmit data, are compatible with USB 1.1, and can be charged at the same time. TXGA is a professional microusb female connector manufacturer, focusing on providing customers with high-quality and reliable connector products for 15 years. Online order, support worry-free after-sales and seven days no reason to return, click to enter [USB connector] to buy.
During the installation and use of the microusb female connector, in order to extend the service life and ensure the normal operation of the connector, we need to pay attention to the following points:
1. Normally during the installation of the micro usb interface female head, please pay attention not to install it with some high temperature or directly install the socket on a combustible object, so as to avoid the phenomenon that the rear USB socket will catch fire naturally.
2. For daily use, please pay attention to the waterproof condition of the micro usb interface female connector. Generally, the USB socket has been used for a long time, and some dust and debris will be absorbed inside the interface, so it is not suitable for cleaning. Wipe with a damp cloth, and not soaked in water. Otherwise, if it is wiped with a damp cloth, it is easy to cause accidents such as electric shock. If the internal metal chip gets water, it will cause a short circuit in the socket circuit, which may cause spontaneous ignition.
3. When the female micro usb interface is plugged in, please be careful not to pull the wire connecting the plug with your hand or pull it out forcefully. You should pinch the interface of the female usb with your hand and connect it to the socket. Pull out the plug slowly in the vertical direction, and be careful not to pull it out at an angle, so as not to damage the socket of the USB female connector.
4. If it is found that there are some cracks on the surface of the micro usb female connector, the usb socket can not be used normally, and it should be replaced immediately. Otherwise, the micro usb female connector is damaged and other conditions, it will be extremely easy to cause some dangerous leakage and other phenomena. Once the human body touches it, it is easy to cause hidden dangers such as electric shock.
5. During the connection of the USB plug and the micro usb female connector, make sure that the plug is completely aligned with the socket inside the socket, otherwise if the terminal pins are not aligned, forcibly inserting it will easily cause the micro usb female connector The terminal pin inside the interface is broken or damaged.
6. Secondly, note that the interface of the micro usb female connector is generally forbidden to reach out to touch the internal end pin, because it is also because the internal end pin of the usb female connector is usually relatively small and sharp. Once touched, it is easy to cause scratches If you touch the metal chip inside the micro usb female interface, it will easily cause accidents such as electric shock.
Choose TXGA, a professional micro usb socket production expert. Provide professional technical consulting services to avoid placing orders incorrectly and randomly. TXGA has advanced technology and strong strength, integrating connector research and development, production, sales and service. The quality is guaranteed, saving time and worry.
