The SIM card holder is a connector that matches the SIM card. The SIM card holder is in contact with the SIM card through the spring plate on it. The SIM card holder is used in the mobile phone to provide the communication interface between the mobile phone and the SIM card. The function and sequence of the pins are the same. TXGA has a large number of SIM card holders in stock, providing products with a variety of specifications, customized by the original factory, and fast-released from the spot. Enter TXGA [SIM card holder] to place an order online for convenient purchase.
Precautions for using the SIM card holder:
1. When the SIM card holder is used in a dusty environment, dust will enter the device through the interface of the SIM card holder. If it accumulates too much, it will cause poor contact and poor movement of the SIM card holder during use. Therefore, the dust or debris in the SIM card holder must be removed regularly.
2. The SIM card does not support hot swapping. When the SIM card is running, unplug the SIM card at will, the data in the card may be lost. On the other hand, it may also damage the SIM card holder.
3. When using a SIM card, pay attention to the front and back, otherwise the card holder cannot read the data of the SIM card.
4. In the connection between the SIM card and the SIM card socket, attention should be paid to whether the sensor metal piece of the SIM card is in full contact with the SIM card socket. If the chip is half or not touched, the SIM card slot will not be able to read the data of the SIM card.
5. The metal chip on the surface of the SIM card should be careful not to scratch or wear, otherwise it will cause the SIM card holder to read data abnormally or fail to read data.
TXGA provides you with spot SIM card connector products. Efficient, convenient and customized service. Please feel free to contact TXGA customer service or place an order online. F2C online platform is more convenient.
