With the development of technology, more and more connectors have been developed to be used in various fields. Some connectors are used in a relatively safe environment, with suitable humidity, away from water sources. But there are also some connectors that work in water-carrying environments all year round. Such as cruise ships, aviation, industrial equipment, cables, sprinklers, etc.
Therefore, the market needs a special connector. It can still guarantee the normal use of the internal mechanical and electrical properties of the connector under certain water pressure. The waterproof connector was born for this. Shenzhen TXGA, a professional manufacturer of waterproof connectors, has been focusing on the research and development and production of waterproof connectors for 15 years, continuous innovation, sincere service, and provide connector solutions for equipment designers all over the world. Enter [Product Center] to learn more.
Because the waterproof connector is a connector with a very high degree of precision, there are some points that must be paid attention to when using and maintaining:
1. The waterproof connector should avoid strong impact or falling, so as not to damage the internal structure and affect the sealing performance.
2. When the waterproof connector is in the separated state, it is necessary to install a protective cover or use other methods to prevent dust. In the long-term use, it is necessary to put an insurance between the plug and the socket.
3. When cleaning the waterproof connector, you can use a silk cloth dipped in absolute ethanol to wipe it clean. The silk cloth can be used again after drying. At the same time, it should be noted that some chemicals cannot be used, such as acetone.
4. Before the waterproof connector is properly connected or fully locked, it is forbidden to power on. In occasions such as fixing and clamping of wiring harnesses, there should be an anti-loosening device when using threaded connections.
5. When the connected plug and socket are waterproof connectors without positioning shells, in order to ensure that the fixed plug and socket can be aligned, the plug and socket should be fixed in a difficult-to-fit state.
