Connection steps of optical fiber connector

The optical fiber connector is a detachable (movable) connection device between the optical fiber and the optical fiber. It precisely connects the two end faces of the optical fiber to make the light energy output by the transmitting optical fiber couple to the receiving optical fiber to the maximum extent.

As a highly innovative field termination connector, the optical fiber connector contains factory-installed optical fibers, pre-polished ceramic ferrules, and a mechanical splice mechanism. When terminating, only the incoming optical fiber or indoor optical fiber is inserted into the mechanical splicing mechanism, no other tools are needed, and the termination process only takes about 2 minutes, which greatly saves installation time. The ferrule and end face of the optical fiber quick connector are pre-ground and pre-polished before leaving the factory. The mechanical connection mechanism is located at the end of the ferrule to fix the inserted optical fiber. The mechanical splicing mechanism is mainly composed of a V-shaped groove and a clamping element; when the optical fiber needs to be inserted, the V-shaped groove is opened with a wedge clamp to facilitate the smooth insertion of the optical fiber. After the optical fiber is inserted into the V-groove and fixed, just pull out the wedge clamp from the V-groove.

TXGA is a leader among optical fiber connector manufacturers, providing customers with connector products and technology-oriented customized services with high-quality products, considerate services and reasonable prices. Purchase optical fiber connectors and enter TXGA [Product Center].