How does TXGA achieve 56G high-speed transmission of board-to-board connectors?

The board-to-board connector is the connector product with the best transmission effect in the connector product category. Because it is only used between PBC boards, the transmission distance is very short, so there is basically no need to consider the transmission loss, and it is a common connector for realizing data interconnection between PCB boards. The high-speed board-to-board connector of TXGA is a more efficient board-to-board interconnection solution.

How is this achieved?

During product design, according to the different transmission speeds required by customers, TXGA connector engineers will design different terminal widths inside the product. For example, the pin pin of a board-to-board connector with a transmission speed of 15G will be significantly thinner than that of a 28G board-to-board connector. This is because the larger the contact area of ​​the terminals when they are inserted, the better the data transmission effect. When the contact area is small, the transmission effect is slightly worse. Therefore, the pins of the high-speed board-to-board connector will be wider and denser under the same connector size. For example, the pin width of an ordinary board-to-board connector is 0.147mm, while the pin width of a connector with a transmission speed of 56G is 1.27mm.

The TXGA high-speed board-to-board connector has a maximum transmission speed of 56G, which can realize high-speed board-to-board connection for various important equipment. TXGA has a variety of high-speed board-to-board connectors, which are sold directly from the factory, with complete models, online purchases, and sales from 1pc. If you need a connector, click to enter [Product Center] to buy.