The market demand for high-quality round-hole female headers is huge

The pin header, as the name suggests, is a row of straight pins made of phosphor-copper alloy with the same spacing and regular order. It is generally widely used in the connection of PCB boards and has the reputation of a universal connector. The female header is a connector used with it and forms a board-to-board connection with the header pins. There are many types of pin and female connectors. Round-hole pin and female connectors are one of them. They are currently widely used in PCB circuit boards in electronics, electrical appliances, and instrumentation. TXGA round hole female header, 15 years of insisting on using focus to achieve professionalism, is trustworthy. Enter [Round Hole Header and Female Header] to purchase.

The round-hole pin and female connector has a huge demand in the component market. In order to ensure that the connector can have reliable performance, we must pay attention to the following points during use:

1. When using the round hole pin header, remember to insert and unplug slowly. The pins need to be aligned with each hole. When pulling out the pin header, do not use too much force to avoid damaging the pins. Try to keep both ends of the pin header coming out together.

2. When installing the round-hole pin header and female connector, if you find that the header lacks the number of pins, you should choose to replace it immediately, otherwise it will cause some problems in the use of the header and female connector.

3. Be careful not to insert the female connector with the round hole pin header in reverse or misplacement. If the plug is not smooth, you can't pull it out forcibly to avoid damage to the pin header.

4. If the round hole pin header connector has a large number of rows, when connecting the header with the header, pay attention to whether each header is aligned with the pinhole of the header. Forcibly connecting in the case of misalignment will easily cause the pin header to bend.

5. If the round-hole pin-and-female connector has been used for a long time, it is necessary to clean the dust in the female pinhole frequently. Because once the dust accumulates too much, it will cause poor contact between the header and the header, and there will be current or unstable signal transmission during use.