The thimble connector is an important piece of hardware used in precision connectors in mobile phones and other electronic products, and is also called a pogo pin connector. At present, it is widely used in semiconductor equipment to connect and transmit signals. TXGA thimble connectors are available in stock, providing connector products of various specifications, customized by the original factory, and quickly shipped from stock. Enter TXGA [Product Center] to place an order online for convenient purchase.
Generally speaking, the structure of the thimble connector includes a circular sleeve, and a slidable circular thimble is provided in the sleeve. One end of the thimble passes through the sleeve and is connected to the battery. A circular hole is opened in the middle of the other end of the thimble. A base is installed at the lower part of the sleeve, and a circular holding hole is arranged on the base, and the base is electrically connected with other components. A spring is installed between the thimble and the base. Generally, the thimble is skewed and abuts against the sleeve due to the external force and imbalance with the rebound thrust of the spring, so that the thimble and the base are mainly electrically connected by the sleeve.
In addition to the basic structure, common thimble connectors include six shapes.
1. Flat-bottomed type: The advantage of the flat-bottomed structure is stability, and because the bottom of the needle tube is a flat-bottomed design, it is easier to weld with the PCB board.
2. Plug-in type: The needle tube of the thimble connector has a positioning pin at the end, so it can be inserted into the PCB board during welding, and there will be no offset during the welding process, and a better positioning effect can be achieved.
3. Bending type: The tail bending structure can provide design engineers with more space utilization options when in use.
4. Double-headed type: The double-headed and double-hole structure provides engineers with more space flexibility when the board is connected in both directions.
5. Wire welding type: suitable for cable end, easy to weld with wire.
6. Threaded type: threaded biting, providing another cold connection method that is different from welding
TXGA thimble connector can meet your different needs and support customized services. You can communicate with engineers according to your needs and customize. Welcome to inquire.
