The horn connector is a very simple internal wiring device. The characteristic of the horn connector is that the structure on both sides of it resembles the two horns of a cow. Therefore it is called a horn connector or a hook horn connector. In contrast, the Jane connector is a connector without a snap structure. According to requirements, the commonly used pin pitches of horn connectors have three specifications: 1.27 pitch, 2.0 pitch and 2.54 pitch; according to the different pitch, the diameter of the square pin used can also be changed.
Connector manufacturer TXGA, specializing in the production of high-current, high-density horn connectors. The transmission is stable, and multiple models are suitable for various environments. Select the connector, select TXGA. Enter [Product Center] to learn more.
The application of horn connectors in the electronic field is very extensive. Therefore, most equipment assemblers will face the problem of how to install the horn connector. In fact, only three points need to be grasped.
1 Insertion direction
When the horn connector is fully mated to U=14.2, it should ensure that it reaches the specified 79483MD.
2 perpendicular to the insertion direction
If the printed board or fixed board-mounted connector is installed floating, the design of the free and fixed board-mounted connector should give an adjustable displacement of at least 1mm (Note: For the rigid installation of the fixed board-mounted connector, install the rack Must have strict tolerances.)
3 Inclination
The design of free and fixed board-mounted connectors allows for inclination errors, with a longitudinal axis of ± 4 ° and a horizontal axis of ± 4 °.
TXGA professional horn connector manufacturer insists on providing customers with safe and efficient connection services with consistent high quality, high quality and high efficiency.
