TXGA公告
【Notice】:TXGA Spring Festival holiday is from February15, 2026 to February23, 2026, a total of nine days, and work will resume on February 24, 2026. During the holiday, the website can place orders normally, and delivery will be arranged after the holiday. If you have any questions, you can send an email to the business manager: philomena.li@txga.com.
TXGA连接器厂家 Building Technology Cornerstone
{{ getLanguageDisplayName(lang) }} | CN | CNY
Your current browser version is too low or not supported. Please upgrade or change your browser. Recommended browsers: Chrome, Edge.

When testing the power connector, you also need to pay attention to various details

The power connector is generally composed of a plug and a socket. The plug is also called a free-end connector, and the socket is also called a fixed connector. The connection and disconnection of the circuit is realized by plugs, sockets, and insertion and separation. TXGA has a variety of power connector models, one-stop purchase. Original authentic products, complete models, online purchase, and fast delivery. You need a power connector, click to enter [Product Center] to purchase.

When testing the power connector, it is also necessary to pay attention to various details.

1) When testing cables or electronic equipment, the probe should meet the requirements. It is strictly forbidden to use meter pens or copper wires for direct testing to prevent the jack of the power connector from being enlarged or the inner wall of the power connector is damaged or the pins are knocked crooked;

2) Before the test cable is plugged into the power connector on the electronic device, the power connector (plug and socket) on the test cable should be checked first. Any appearance damage, pin (hole) corrosion, pin distortion, or insertion It cannot be inserted if the hole is deformed, dust pollution, wire is broken, or the shielding wire is broken;

3) The plugging operation of the power connector during the test should generally be performed after disconnecting the power supply and staying for no less than 3 minutes, and plugging and unplugging with power is prohibited;

4) After the model and product electrical performance tests are completed, if the power connector does not separate for a long time, the power connector should be insured according to the requirements of the design and process documents, and the locking device of the power connector should not be loosened during the fuse.

TXGA, a power connector manufacturer, has 15 years of connector production and R&D experience, adheres to brand strategy, advanced storage, and considerate service. When you urgently need to buy a suitable power connector, don't forget TXGA.