What should I do if the connector selection is too complicated?

Connectors are one of the most commonly used parts in almost all electronic devices. When purchasing connectors. The selection is often the most technical and the most difficult. Because the procurement is not a professional equipment engineer, and the connector sales are not a professional connector engineer. This requires the connector manufacturer to do a series of tests before leaving the factory to ensure that the connector meets the requirements for use. The complete connector test process includes the following items:

1. Institutional engineers confirm the mechanical characteristics of the connector (temperature resistance, humidity resistance and corrosion resistance)

2. The ability of hardware engineers to calculate connector overcurrent

3. Confirm whether the multi-connector can be foolproof, and prevent choosing different connectors to choose the same model

4. The hardware confirmation signal and power supply come from different connectors. Will there be a situation where the internal chip of the module is damaged if a connector is suspended?

5. Determine the order of the male pins

6. Determine the order of the female headers after software conversion

7. After the conversion is completed, check whether the circuit board and the wiring harness are connected correctly.

High-quality connector manufacturers can provide a complete connector inspection report to assist in purchasing and selection. Professional connector manufacturer TXGA, 15-year high-quality brand, one-to-one technical support by senior R&D engineers, and provide professional connector selection guidance services. To purchase connectors, enter [Product Center] to learn more.