Wire to Wire connector is also called Wire to Wire connector. It is one of the three main categories of connector termination properties. The other two are board-to-board and wire-to-board. The characteristic of the wire-to-wire connector is that two individual wires or corresponding wires in two cables are connected to each other.
The wire-to-wire connector can be a cable with a connector, or a group of cables can share a connector. In the process of use, the line connector is prone to short-circuit, fever, sparks and other phenomena. There are two main reasons for this phenomenon. The first is that the operation is not standardized when the cable is crimped. Because the wire insulation layer at the installation wire connector needs to be stripped, and when the operation is not standardized and the conductors collide, it is easy to cause sparks. The second is that if the contact area of the wire connector is smaller than the conductor area, it is easy to cause excessive heat at the joint. Over time, it may shorten the life of the shell gel and even ignite the surrounding combustibles. Eventually induce a fire.
Therefore, to ensure the safe use of wire-to-wire connectors, you need to choose a reliable connector manufacturer. TXGA, an expert in the production of wire-to-wire connectors. It can provide professional technical support for your application environment to avoid placing orders by mistake or placing orders randomly. TXGA has advanced technology and strong strength. Order online, support worry-free after-sales and seven days no reason to return, click to enter [Product Center] to buy immediately.
