The radio frequency connector is specially used to transmit radio frequency signals, and its transmission frequency range is very wide, up to 50GHZ or higher. It is mainly used for radar, communication, data transmission and aerospace equipment. TXGA provides RF connectors in stock, a variety of specifications, and quick delivery from the stock, after-sales from the original factory, enter TXGA [Product Center] to place an order online for convenient purchase.
For radio frequency connectors, the precision of crimping is controlled by controlling the precision ratchet of the crimping tool during the crimping process. The quality of crimping tools directly determines the quality of crimping, so crimping tools should meet the following basic requirements:
(1) A crimping tool with a complete cycle mechanism must be used, that is, after the crimping operation starts, the crimping tool cannot be opened before the crimping cycle is completed, and the crimping tool is automatically reset after the crimping is completed;
(2) The crimping tool should ensure that the crimping terminal and the crimped wire are continuously and correctly positioned in the tool during the full crimping cycle;
(3) The standard supporting tools provided by the crimping tool manufacturer should be selected as far as possible, and their performance should meet the requirements of the product standard, and they can provide thoughtful service. The middleman only sells, and many problems cannot be solved;
(4) When using self-made non-standard crimping tools, they should be tested and calibrated repeatedly to ensure that the performance of the tools meet the requirements, and they can be used after approval;
(5) Before using the crimping tool, the crimping tool must be calibrated;
(6) The crimping tool should be inspected regularly. After three months of continuous use or the accumulative number of crimping times reaches 2000, it must be re-inspected to ensure that it can continue to be used after meeting the requirements.
