The connector connector is used on the connector to connect the positioning joint of the electronic circuit, which is composed of the connector and the plug-in unit. Therefore, the connector can also be directly understood as a connector. TXGA, a professional connector manufacturer, has been focusing on connector R&D and production for 16 years. Support mold customization, factory direct sales, starting at 1pcs, and provide connector solutions for equipment designers all over the world. Enter [Product Center] to learn more.
In a sense, the reliability of the connector depends on the contact pressure of its contact pair. It is an important indicator that can directly affect the size of the contact resistance and the amount of wear of the contact pair.
In most structures, it is quite difficult to directly measure the contact pressure. Therefore, the contact pressure is often measured indirectly through the separation force of a single foot. For round pinhole contact pairs, a standard pin with a prescribed weight is usually used to test the ability of the female contact to hold the weight. Generally, the diameter of the standard pin is the lower limit of the diameter of the male contact, which is -5μm. The total separation force is generally twice the sum of the upper line of the single-leg separation force. When the total separation force exceeds 50N, it is quite difficult to insert and remove manually. Of course, for some test equipment or occasions with special requirements, you can choose to use zero insertion force connectors, automatic disconnect connectors, and so on.
TXGA supports one-stop customization services. You only need to provide the final application conditions, and you can customize research and development according to your needs to meet various complex application conditions. Professional engineering techniques and simulation software effectively avoid design errors, ensure product functions meet specifications, shorten development time, and reduce development costs.
