The electronic connector is divided into wire end connector and board end connector. The board end connector usually needs to be welded on the pcb board for use, while the wire end connector needs to be connected with wires for use. Different types of wire end connectors use different termination methods, so it is necessary to select a highly reliable termination technology according to actual requirements.
1. Cup type welding wire termination technology:
The connector tail pin is a notched cup. Put the wire into the welding wire cup and connect the wire to the connector by melting the solder.
2. Crimping type termination technology:
Crimping is a technology to connect wires to contact pairs. A good crimping connection can make the connector obtain better mechanical strength and electrical continuity, so that it can withstand worse environmental conditions. Correct crimping connection is better than soldering, especially when crimping must be used in the application of high current connectors, special crimping pliers or automatic or semi-automatic crimping machines should be used, and appropriate contact tubes should be selected according to the cross-section of the conductor.
3. Winding type termination technology:
The tail end of the connector contact is a long column with square section. The wire is wound on the tail end of the contact piece through the wire winding device to deform the edges and corners and realize the close contact between the wire and the contact pin.
Reliable termination process is the basis to ensure the stability of connector interconnection. As the world's leading manufacturer of key connectors, TXGA has been providing reliable, professional and stable connector products for the industry for more than ten years, realizing various personalized needs of customers. If a connector is required, enter the TXGA [Product Center].
