The wiring harness refers to the wiring components that connect the electrical equipment in the circuit. It is usually composed of insulating sheath, terminal blocks, wires and insulating wrapping materials. The wiring terminal of the wiring harness is the wiring harness connector. In the "terminal crimping", a very important step in wire harness processing, the technological level of the manufacturer plays a decisive role in the quality of the wire harness.
There are the following points for the production of crimp connectors.
1. The connector harness insulator must fully enter and extend through the crimping piece.
2. Multiple wires in the insulation layer of the connector harness must pass through the insulation crimping piece.
3. The connector crimping will not damage the insulating material of the wiring harness.
4. When the connector is crimped, it is necessary to completely wrap and support the wire harness insulation and not expose an opening greater than 45 degrees.
5. The insulation material of the harness has not been pierced to the extent that the protrusion penetrates the conductor or wire.
6. The crimping piece of the connector should be in contact with the top of the wire harness insulation layer.
7. The insulation layer of the wiring harness should be flush with the connector crimping line.
8. Identify the insulation layer of the wire harness that shows the wire damage.
9. Wires, connectors, assembly process and wiring harness insulation must comply with compatibility.
At present, wiring harnesses are mostly used in various precision electronic equipment, such as automotive circuits, computer motherboard circuits, and household appliances circuits. Pay attention to the safety of the wiring harness and choose the quality manufacturer TXGA. TXGA original direct sales wiring harness connector, sufficient inventory, abundant models, online order, same-day delivery, enter the [product center], immediately place the order.
